Bisca-Stic 25-500S

Bisca-Stic 25-500S

Reference	Bisca-Stic 25-500S
Product properties	Test standard	-	Values	Units
Coating %		-	61	-
Weight without adhesive	ASTM D751-00	± 5%	500	g/m2
Weight including liner			610	g/m2
Thickness without adhesive	ASTM D751-00	-	0.25	mm
Thickness without liner			0.315	mm
Breaking strength	ASTM D751-00	warp	400	N/cm
		weft	300	N/cm
Tearing strength	ASTM D751-00	warp	20	N
		weft	15	N
Surface texture	-	Smooth non-stick
Adhesive type		Silicone PSA
Adhesion			5	N/cm
Adhesive temperature resistance			-73 to +240	°C
Glass style properties	Test standard	-	Values	Units
Glass style reference		-	128	-
Filament Diameter	DIN EN 12654	warp	EC7	micron
		weft	EC7	micron
Yarn count	DIN EN 12654	warp	22x3	Tex
		weft	22x3	Tex
Fabric construction	DIN EN 1049	warp	16.8	Ends/cm
		weft	12	Picks/cm
Weave pattern	DIN ISO 9354	Plain
Fabric thickness	DIN ISO 4603/E	-	0.2	mm
Base weight	DIN EN 12127	± 5%	196	g/m2

Note: various widths are available, please contact our sales team to make your enquiry, details are available upon request.

Values shown are typical and are subject to change without notice. Before using, the user should determine the suitability of the product for its intended use and assumes all risk and liability in connection therewith. Specifications are subject to change without notice.

Weight tolerance g/m2 ± 5% variation.
Teflon® content ±2% variation.

Download PDF for Bisca-Stic 25-500S

For further information on our adhesives, see: Biscor adhesive page

Material Properties

Extremes of heat and cold resistance: Minus - 73°C to + 260°C

Chemical inertness: Affected only by a few rare substances at very high temperatures

High release from sticky materials 'Non-Stick'

Easy cleaning (Nothing bonds permanently)

Low Friction co-efficient: 0.04 - 0.10; depending on load and surface speed

Chemical corrosion and moisture resistance

Mildew and fungus resistance

Outstanding electrical, insulative and di-electric properties.

Ultra-Violet, Infra-Red, Micro-Wave, Radio Frequency Resistance

Non Combustible - Self Extinguishing

Low thermal Expansion: < 5%

Food Approval (USFDA)

Lightweight and energy efficiency for economical operation.

Additional Information

Availability: Biscor's fabrics are available from 3mm up to 4800mm wide. Please contact our sales office on +44 (0)1274 775577 or email info@biscor.com to confirm maximum available width for the above product.

Fabric Care: Do not fold or crease the fabric when handling and installing. The fabric can eventually discolour in sunlight (turns white), but is otherwise unaffected by chemical or biological agents, heat or cold within its temperature range, or by most areas of the electro-magnetic spectrum.

Other formats: [Bisca-Tex 25-500] Consult our staff. Also available chemically etched one side for proprietary adhesive bonding. Standard etch is silica based, Sodium based etch is available upon request.

PTFE (Teflon®) begins to soften at 260°C, increasing wear rate. Somewhat above 300°C, fumes are given off and these should not be inhaled. COSHH data available upon request. After contact wash handles thoroughly before handling or smoking tobacco.

email : info@biscor.com