Zone Tape Style A

Zone Tape Style A

Thickness of PTFE glass fabric	Biscor grade reference	Width of adhesive (X)	Clear area of PTFE (Y)	Width of adhesive (Z)
0.076mm	ZPTA3	10mm	20mm	10mm
0.109mm	ZPTA5
0.118mm	ZPTA6
0.129mm	ZPTA7			-
0.209mm	ZPTA10

Material Properties

Double sided adhesive tape is applied directly to the edges of the PTFE coated glass fabric. Three dimensions are relevant.

1) Total width of tape

2) Width of double sided adhesive (both sides)

3) Clear area in centre of tape (useable)

Example: ZPTA3 - 10 X 20 X 10 = total width 40mm (see box below)

Additional Information

Availability: All materials are ex stock Bradford and can be supplied in any width from 10mm to 600mm wide. All zone tapes are supplied on standard roll lengths 30m. Please consult Biscor for availability of other lengths and die cut pieces. Standard cardboard core sizes are 76mm I.D., 38mm I.D., and plastic cores are available on request.

Other Formats: Conductive black for improved heat transfer.

Fabric care: Do not fold or crease the fabric when handling or installing. The fabric can eventually discolour in sunlight (turns white), but is otherwise unaffected by chemical or biological agents, heat or cold within its temperature range, or by most areas of the electromagnetic spectrum.

PTFE (Teflon®) softens at 260oC, increasing wear rate. Somewhat above 300oC, fumes are given off and these should not be inhaled. COSHH data available upon request. Do not smoke or handle tobacco after handling PTFE.

email : info@biscor.com