Zone Tape Style B

Zone Tape Style B

Thickness of PTFE glass fabric	Biscor grade reference	Overall width of tape (X) )	Overall width of PTFE (Y)	Clear area of PTFE (Z)
0.076mm	ZPTB3	58mm	30mm	20mm
0.109mm	ZPTB5
0.118mm	ZPTB6
0.129mm	ZPTB7			-
0.209mm	ZPTB10

Material Properties

This style is the most popular. Masking tape is applied to the edges of the PTFE coated glass fabric. Three dimensions are relevant.

1) Overall width of tape

2) Overall width of PTFE coated glass fabric

3) Clear (useable) area of PTFE glass fabric

Example: ZPTB3 - 58 X 30 X 20 = total width 58mm (see box below)

Total width of tape 58mm (X)

Biscor's style B zone tape has 19mm masking tape on each edge as standard. 15, 25 and 38mm widths are available upon request.

Additional Information

Availability: All materials are ex stock Bradford and can be supplied in any width from 10mm to 600mm wide. All zone tapes are supplied on standard roll lengths 30m. Please consult Biscor for availability of other lengths and die cut pieces. Standard cardboard core sizes are 76mm I.D., 38mm I.D., and plastic cores are available on request.

Other Formats: Conductive black for improved heat transfer.

Fabric care: Do not fold or crease the fabric when handling or installing. The fabric can eventually discolour in sunlight (turns white), but is otherwise unaffected by chemical or biological agents, heat or cold within its temperature range, or by most areas of the electromagnetic spectrum.

PTFE (Teflon®) Softens at 260oC, increasing wear rate. Somewhat above 300oC, fumes are given off and these should not be inhaled. COSHH data available upon request. Do not smoke or handle tobacco after handling PTFE.

email : info@biscor.com