Bisca-Bake 5

Bisca-Bake 5

Reference	Bisca-Bake 5
Product properties	Test standard	-	Values	Units
Coating %		-	56	-
Coated weight	ASTM D751-00	± 5%	240	g/m2
Total thickness	ASTM D751-00	.	0.109	mm
Breaking strength	ASTM D751-00	warp	160	N/cm
ASTM D751-00	ASTM D751-00	weft	120	N/cm
Tearing strength	ASTM D751-00	warp	10	N
ASTM D751-00	ASTM D751-00	weft	7	N
Surface texture	-	Smooth non-stick
Glass style properties	Test standard	-	Values	Units
Glass style reference		-	2116	-
Filament Diameter	DIN EN 12654	warp	EC7	micron
		weft	EC7	micron
Yarn count	DIN EN 12654	warp	22	Tex
		weft	22	Tex
Fabric construction	DIN EN 1049	warp	24	Ends/cm
dd	dd	weft	23	Picks/cm
Weave pattern	DIN ISO 9354	Plain
Fabric thickness	DIN ISO 4603/E	.	0.09	mm
Base weight	DIN EN 12127	± 5%	107	g/m2

Note: various widths and sizes are available, minimum order quantities may apply. Please email your requirements to info@biscor.com and we will respond with a price as soon as possible.

Values shown are typical and are subject to change without notice. Before using, the user should determine the suitability of the product for its intended use and assumes all risk and liability in connection therewith. Specifications are subject to change without notice.

Weight tolerance g/m2 ± 5% variation.
Teflon® content ±2% variation.

Download PDF for Bisca-Bake 5

Material Properties

	Extremes of heat and cold resistance: minus - 73°C to plus + 260°C
	Chemical inertness: affected only by a few rare substances at very high temperatures
	High release from sticky materials 'non-stick'
	Easy cleaning (nothing bonds permanently)
	Low friction co-efficient: 0.04 - 0.10; depending on load and surface speed
	Chemical corrosion and moisture resistance
	Mildew and fungus resistance
	Outstanding electrical, insulative and di-electric properties
	Ultra-violet, infra-red, microwave, radio frequency resistance
	Non combustible - self extinguishing
	Low thermal expansion: < 5%
	Food approval (USFDA)
	Lightweight and energy efficiency for economical operation

Additional Information

Availability: Biscor's fabrics are available from 3mm up to 4800mm wide. Please contact our sales office on +44 (0)1274 694684 or email info@biscor.com to confirm maximum available width for the above product.

The material can be cut to size to fit in baking trays or other food processing applications, please consult our staff to investigate minimum quanity orders available.

Other formats: Pressure Sensitive Silicone adhesive one side. Also available chemically etched one side for proprietary adhesive bonding. Standard etch is silica based, sodium based etch is available upon request.

Fabric Care: Do not fold or crease the fabric when handling and installing. The fabric can eventually discolour in sunlight (turns white), but is otherwise unaffected by chemical or biological agents, heat or cold within its temperature range, or by most areas of the electro-magnetic spectrum.

PTFE (Teflon®) begins to soften at 260°C, increasing wear rate. Somewhat above 300°C, fumes are given off and these should not be inhaled. COSHH data available upon request. After contact wash handles thoroughly before handling or smoking tobacco.

email : info@biscor.com