Weight tolerance g/m2 ± 5% variation.
Teflon® content ±2% variation.

Material Properties

	Extremes of heat and cold resistance: minus - 73°C to plus + 260°C
	Chemical inertness: affected only by a few rare substances at very high temperatures
	High release from sticky materials 'non-stick'
	Easy cleaning (nothing bonds permanently)
	Low friction co-efficient: 0.04 - 0.10; depending on load and surface speed
	Chemical corrosion and moisture resistance
	Mildew and fungus resistance
	Outstanding electrical, insulative and di-electric properties
	Ultra-violet, infra-red, microwave, radio frequency resistance
	Non combustible - self extinguishing
	Low thermal expansion: < 5%
	Food approval (USFDA)
	Lightweight and energy efficiency for economical operation

Additional Information

Availability: Biscor's fabrics are available from 3mm up to 4800mm wide. Please contact our sales office on +44 (0)1274 694684 or email info@biscor.com to confirm maximum available width for the above product.

The material can be converted to a fabricated engineered product. Consult our staff. [See: Biscor belts - Engineered Products].

Other formats: Pressure Sensitive Silicone adhesive one side [See: Bisca-Pak5 Stic]. Also available chemically etched one side for proprietary adhesive bonding. Standard etch is silica based, sodium based etch is available upon request.

Fabric Care: Do not fold or crease the fabric when handling and installing. The fabric can eventually discolour in sunlight (turns white), but is otherwise unaffected by chemical or biological agents, heat or cold within its temperature range, or by most areas of the electro-magnetic spectrum.

PTFE (Teflon®) begins to soften at 260°C, increasing wear rate. Somewhat above 300°C, fumes are given off and these should not be inhaled. COSHH data available upon request. After contact wash handles thoroughly before handling or smoking tobacco.