Goldweld

Reference
Product properties	Test standard	-	Values	Units
Coating %	-	-	69.4	-
Coated weight	ASTM D751-00	± 5%	320	g/m2
Total thickness	ASTM D751-00	-	0.17	mm
Breaking strength	ASTM D751-00	warp	200	N/cm
-	ASTM D751-00	weft	150	N/cm
Tearing strength	ASTM D751-00	warp	8	N
-	ASTM D751-00	weft	8	N
Surface texture	-	Smooth non-stick
Glass style properties	Test standard	-	Values	Units
Glass style reference	-	2116
Filament Diameter	DIN EN 12654	warp	EC7	micron
-	DIN EN 12654	weft	EC7	micron
Yarn count	DIN EN 12654	warp	22	Tex
-	DIN EN 12654	weft	22	Tex
Fabric construction	DIN EN 12654	warp	24	Ends/cm
-	DIN EN 12654	weft	23	Picks/cm
Weave pattern	DIN ISO 9354	Plain
Fabric thickness	DIN ISO 4603/E	-	0.09	mm
Base weight	DIN EN 12127	± 5%	107	g/m2

Note: various widths are available, please contact our sales team to make your enquiry, details are available upon request.

Values shown are typical and are subject to change without notice. Before using, the user should determine the suitability of the product for its intended use and assumes all risk and liability in connection therewith. Specifications are subject to change without notice.

You can purchase Goldweld online at www.goldweld.co.uk

Weight tolerance g/m2 ± 5% variation.
Teflon® content ±2% variation.

Download PDF for Goldweld

Material Properties

	Extremes of heat and cold resistance: minus - 73°C to plus + 260°C
	Chemical inertness: affected only by a few rare substances at very high temperatures
	High release from sticky materials 'non-stick'
	Easy cleaning (nothing bonds permanently)
	Low friction co-efficient: 0.04 - 0.10; depending on load and surface speed
	Chemical corrosion and moisture resistance
	Mildew and fungus resistance
	Outstanding electrical, insulative and di-electric properties
	Ultra-violet, infra-red, microwave, radio frequency resistance
	Non combustible - self extinguishing
	Low thermal expansion: < 5%
	Lightweight and energy efficiency for economical operation

Additional Information

Availability: Biscor's fabrics are available from 3mm up to 4800mm wide. Please contact our sales office on +44 (0)1274 694684 or email info@biscor.com to confirm maximum available width for the above product.

Other formats: The material can be converted to a fabricated engineered product. Consult our staff. [See: Biscor belts - Engineered Products]. Or see www.goldweld.co.uk for a range of die cuts and bands for a variety of welding machines.

Pressure Sensitive Silicone adhesive one side [See: Goldweld ADH]. The material can be converted to a fabricated engineered product. Consult our staff. Also available chemically etched one side for proprietary adhesive bonding. Standard etch is silica based, sodium based etch is available upon request.

Fabric Care: Do not fold or crease the fabric when handling and installing. The fabric can eventually discolour in sunlight (turns white), but is otherwise unaffected by chemical or biological agents, heat or cold within its temperature range, or by most areas of the electro-magnetic spectrum.

PTFE (Teflon®) begins to soften at 260°C, increasing wear rate. Somewhat above 300°C, fumes are given off and these should not be inhaled. COSHH data available upon request. After contact wash hands thoroughly before handling or smoking tobacco.

Teflon

email : info@biscor.com